Blackcurrant Wine Recipe: Table Wine or Port Style, 1 Gallon

By The MyHomeWine Team · Updated

As an Amazon Associate we earn from qualifying purchases. How we choose products.

A glass of very dark blackcurrant wine beside sprigs of fresh blackcurrants on a rustic wooden surface
Illustration
On this page
  1. Blackcurrant Wine at a Glance
  2. Why Blackcurrants Need Water and Time
  3. Recipe 1: Blackcurrant Table Wine
  4. Recipe 2: From Dried Blackcurrants, or Port Style
  5. The Pressure Cooker Method
  6. Red, White or Black Currants

The short answer: blackcurrant wine needs surprisingly little fruit. Jack Keller’s two 1 gallon recipes use just 1½ pounds of fresh blackcurrants, with ¾ pound of black raisins and 2 pounds of ripe bananas for body. The fruit is cooked in a pressure cooker to break the tough skins, which cuts the amount of currants you need. One recipe makes a table wine with Lalvin RC-212, the other a sweet, tawny, port style wine with Lalvin K1V-1116. Both come from his Requested Recipes Collection (compiled 2020), adapted from J. R. Mitchell’s Scientific Winemaking, Made Easy.

Blackcurrant wine is the same thing as black currant wine; the one word spelling is the British one, as Keller notes. New to winemaking? Start with our full guide to making wine at home or browse the homemade wine recipe collection.

Blackcurrant Wine at a Glance

DetailTable winePort style
Fresh blackcurrants1½ lb1½ lb
Black raisins¾ lb¾ lb
Ripe bananas2 lb2 lb
Sugar1¼ lb1¾ lb
YeastLalvin RC-212 (Bourgovin)Lalvin K1V-1116 (Montpellier)
Nutrient1 tsp yeast nutrient2 tsp nutrient fortified with yeast hulls
Final stage4 to 6 months in a dark, cool place4 to 6 months in a dark, cool place
Improves forup to 3 yearsup to 6 years

Both are made to a gallon. The table wine can be enjoyed earlier than its three years, Keller says.

Why Blackcurrants Need Water and Time

Keller says black currants have a pretty tough skin and must be crushed, heated or broken down with a food processor on its lowest setting to get at their very flavorful juice. That is why these recipes work from a modest weight of fruit: the juice is strongly flavored, and the pressure cooker pulls it out.

Less fruit, more body from other sources

Compare this with the 6 pounds per gallon in our mulberry wine. Here, 1½ pounds of currants carry the flavor, while raisins and bananas, which Keller says are used to increase body, fill out the wine. He also points to the other blackcurrant recipes in his main recipe section for readers who want to compare.

Time does the rest

Neither recipe is quick. Both rack every 30 days until the wine clears and drops no further sediment during a 30 day period, then rest for months in a dark, cool place. For other dark berry wines on this site, see elderberry wine and blackberry wine.

Recipe 1: Blackcurrant Table Wine

Keller’s first recipe aims to minimize any change in flavor from the heat and make a slightly tawny table wine. Pour the cooked fruit onto the sugar in the primary, add cold water to bring the temperature down, and wait for the pulp to cool to room temperature before adding the rest.

Recipe card

Blackcurrant table wine, 1 US gallon

Makes
About 5 bottles (750 ml)
Time to drink
Rack until clear, 4 to 6 months resting; improves for up to 3 years
Difficulty
Advanced

Ingredients

  • 1½ lb fresh blackcurrants
  • ¾ lb black raisins
  • 2 lb ripe bananas
  • 1¼ lb granulated sugar
  • 1 tsp pectic enzyme
  • 1 tsp citric acid
  • ¼ tsp tannin
  • 1 crushed Campden tablet
  • Water to make 1 gallon
  • 1 tsp yeast nutrient
  • Lalvin RC-212 (Bourgovin) wine yeast

Method

  1. Bring 1 quart of water to a boil. Slice the bananas crosswise, peel and all, into ½ inch slices.
  2. Put the bananas, raisins and blackcurrants in a pressure cooker. Pour in the boiling water and secure the lid.
  3. Bring to 15 pounds of pressure for 3 minutes. Immediately move the cooker under cold running water to bring the pressure to zero.
  4. Remove the lid and pour the contents onto the sugar in the primary. Stir, add the rest of the water (cold) and stir until the sugar is dissolved. Cover and cool to room temperature.
  5. Add everything except the pectic enzyme and the yeast. Stir, cover and wait 12 hours. Add the pectic enzyme, stir, cover and wait another 12 hours.
  6. Add the activated yeast and cover. When fermentation is vigorous, stir twice daily for three days.
  7. Pour through a nylon straining bag and let it drip for about an hour. Do not squeeze. Pour the liquor into a secondary and fit an airlock.
  8. Rack every 30 days into a sanitized secondary until the wine clears and no further sediment drops during a 30 day period.
  9. Stabilize and place in the refrigerator for three days. Rack, sweeten to taste, top up, refit the airlock and store in a dark, cool place for 4 to 6 months. Rack into bottles.

Quantities and method from Black Currant Table Wine in Jack Keller’s Requested Recipes Collection (compiled 2020), adapted from J. R. Mitchell’s Scientific Winemaking, Made Easy. Keller says it keeps improving for up to three years but may be enjoyed earlier.

Recipe 2: From Dried Blackcurrants, or Port Style

Keller’s second pressure cooker recipe takes advantage of the cooker’s tendency to make a tawny wine. It makes a sweet, tawny, port style wine, and it needs a yeast that can ferment to 20% alcohol by volume, Lalvin K1V-1116, plus a yeast nutrient fortified with yeast hulls, such as Fermaid from Scott Labs. For the style itself, our guide to how to make port wine goes further. To sweeten it afterward, see how to backsweeten wine.

If you only have dried blackcurrants

Keller has a separate 1 gallon recipe for dried currants, which does not need a pressure cooker: 14 ounces of dried black currants, 1¾ pounds of granulated sugar, 7¼ pints of water, ½ teaspoon of pectic enzyme, ¾ teaspoon of acid blend, 1 teaspoon of yeast nutrient and a wine yeast. You dissolve the sugar in a quart of boiling water, add the currants for 30 minutes, then ferment in a cool place (60 to 65°F) after 7 days on the pulp. Keller says you may taste it after six months, but it improves with age. Beware of the little black raisins sold as Zante currants: Keller says they make a decent wine, but they are not black currants.

Recipe card

Blackcurrant port style wine, 1 US gallon

Makes
About 5 bottles (750 ml)
Time to drink
Rack until clear, 4 to 6 months resting; improves for up to 6 years
Difficulty
Advanced

Ingredients

  • 1½ lb fresh blackcurrants
  • ¾ lb black raisins
  • 2 lb ripe bananas
  • 1¾ lb granulated sugar, divided
  • 1 tsp pectic enzyme
  • 1 tsp citric acid
  • ¼ tsp tannin
  • 1 crushed Campden tablet
  • Water to make 1 gallon
  • 2 tsp yeast nutrient fortified with yeast hulls, divided
  • Lalvin K1V-1116 (Montpellier) wine yeast

Method

  1. Bring 1 quart of water to a boil. Slice the bananas crosswise, peel and all, into ½ inch slices.
  2. Put the bananas, raisins and blackcurrants in a pressure cooker. Pour in the boiling water and secure the lid.
  3. Bring to 15 pounds of pressure for 3 minutes. Remove from the heat and let it cool naturally until the pressure drops to zero.
  4. Remove the lid and pour the contents onto half the sugar in the primary. Stir, add the rest of the water (cold) and stir until the sugar is dissolved. Cover and cool to room temperature.
  5. Add the citric acid, tannin, crushed Campden tablet and half the yeast nutrient. Stir, cover and wait 12 hours. Add the pectic enzyme, stir, cover and wait another 12 hours.
  6. Add the activated yeast and cover. When fermentation is vigorous, stir twice daily for three days.
  7. Pour through a nylon straining bag and let it drip for about an hour. Do not squeeze. Stir half of the remaining sugar and half of the remaining nutrient into the liquor until dissolved. Pour into a secondary and fit an airlock.
  8. When the specific gravity drops to 1.010, stir in the remaining sugar and nutrient until dissolved.
  9. Rack every 30 days into a sanitized secondary until the wine clears and drops no further sediment in a 30 day period. Keller warns this may take a while.
  10. Stabilize and refrigerate for five days. Rack, sweeten to 1.030, top up, refit the airlock and store in a dark, cool place for 4 to 6 months. Rack into bottles.

Quantities and method from Black Currant Port-Style Wine in Jack Keller’s Requested Recipes Collection (compiled 2020), which he labels his own recipe adapted from J. R. Mitchell’s Scientific Winemaking, Made Easy. Keller says it keeps improving for up to six years but may be enjoyed earlier.

The Pressure Cooker Method

Keller had heard of pressure cooking blackcurrants for years, but only found a thorough explanation in J. R. Mitchell’s book. Mitchell’s verdict, as Keller reports it, is that it is an easy way to get at the juice, but it comes at a price: the flavor is altered slightly by the extreme heat and the wine can become tawny in taste. Some people prefer that, especially in a sweet, port style wine.

What the two recipes change

The table wine tries to limit the flavor change: 15 pounds of pressure for 3 minutes, then the cooker goes under cold running water to drop the pressure right away. The port style wine uses the same pressure and time, but lets the cooker cool naturally, which suits a tawny wine.

Safety basics

Follow your own pressure cooker’s manual for how to seal it, how to release pressure and whether it can be cooled under running water. Do not open it until the pressure is at zero. Keller’s recipes only say to bring it to 15 pounds for 3 minutes, so use a cooker that reaches that pressure.

No pressure cooker?

Keller’s list of options is to crush the currants, heat them, or break them down in a food processor on the lowest setting. His own recipes in the pressure cooker method use less fruit, so expect to adjust if you pick another route.

Red, White or Black Currants

These recipes are for black currants only. Keller covers whitecurrants separately: his whitecurrant wine (1) uses 2½ pounds of ripe whitecurrants, 2 pounds of sugar, 1 crushed Campden tablet, 1 teaspoon of yeast nutrient and one packet of Tokay wine yeast per gallon, and he lists varieties such as White Imperial and White Pearl. Do not swap them one for one with blackcurrants, because the quantities and flavor are different. Make and drink wine responsibly, and only if you are of legal drinking age.

What you need for blackcurrant wine

Items from the recipe cards that are easy to forget. You also need a pressure cooker, a nylon straining bag, citric acid, tannin, Campden tablets, a hydrometer, Lalvin RC-212 or K1V-1116 yeast and, for the port style wine, a nutrient fortified with yeast hulls.

  1. 1Primary fermenter

    FastRack 6.5 Gallon Fermenting Bucket

    A food grade HDPE bucket with a lid drilled for an airlock grommet, per the listing, with room for the cooked fruit and the daily stirring.

    Check price on Amazon

  2. 2Pectic enzyme

    Home Brew Ohio Pectic Enzyme, 1 lb

    Both of Keller’s pressure cooker recipes add 1 teaspoon of pectic enzyme after the first 12 hours.

    Check price on Amazon

  3. 3Yeast nutrient (table wine)

    Fermax Yeast Nutrient, 1 lb

    The table wine calls for 1 teaspoon of yeast nutrient. The port style wine needs one fortified with yeast hulls, so check this listing against that requirement.

    Check price on Amazon

  4. 4Secondary

    1 Gallon Glass Jug with Airlock, Black Polyseal Cap and #6.5 Rubber Bung

    A 1 gallon glass jug sold with an airlock, per the listing, for the many rackings these recipes call for.

    Check price on Amazon

A currant wine is made from currants rather than grapes. Keller covers blackcurrants and whitecurrants separately, and warns that the small black raisins sold as Zante currants are from the Black Corinth grape, so a wine made from them is a raisin wine, not a blackcurrant wine.
We do not have a source that names a closest match. Keller describes the juice as very flavorful, and his recipes need only 1½ pounds of fresh blackcurrants per gallon, so the flavor is strong. Pressure cooking, he says, can leave the wine slightly tawny.
Jack Keller’s pressure cooker recipes use 1½ pounds of fresh blackcurrants per gallon, with ¾ pound of black raisins and 2 pounds of bananas. His dried currant recipe uses 14 ounces of dried blackcurrants per gallon.