Homemade wine guide

Bentonite for Wine: How Much, When to Add It and How to Mix It

By The MyHomeWine Team · Updated

As an Amazon Associate we earn from qualifying purchases. How we choose products.

Bentonite for wine: a bowl of grey bentonite powder and a jar of slurry beside a carboy of cloudy white wine
Illustration
On this page
  1. What Bentonite Does in Wine
  2. When to Add Bentonite
  3. How to Mix Bentonite Slurry
  4. Bentonite Dose Table
  5. Bentonite vs Sparkolloid vs Kieselsol
  6. Does Bentonite Affect Taste or Color?

Bentonite is a volcanic clay that you stir into water, add to wine and rack off a week later. For homemade wine the usual dose is 1 to 2 grams per gallon after fermentation, or up to 5 grams per gallon if you add it during fermentation, according to the supplier piwine. Mix it as a thin slurry, 20 ml of water per gram of bentonite, and give it time to hydrate before it goes in. It clears protein haze in white wine.

Below we cover when to add it, how to mix the slurry, a dose table for 1 and 5 gallons, how it compares with Sparkolloid and kieselsol, and whether it changes taste or color. We did not run lab trials. The science comes from Bruce Zoecklein's bentonite publication for Virginia Tech, the dose and mixing figures from piwine, and the legal status from the federal wine rules.

What Bentonite Does in Wine

Zoecklein explains that bentonite is a mineral of the montmorillonite family, mined mainly in Wyoming in the United States, and that the form most used there is sodium bentonite. When it hydrates, its tiny plates separate and form a colloidal suspension with a huge surface area, and that surface carries a negative charge. Positively charged wine proteins stick to the clay and sink with it. Zoecklein says the main uses are clarification and protein stability.

Protein Haze in White Wine

Protein instability is a problem mainly in white wines. Zoecklein describes it as possibly second only to potassium bitartrate as the most common non-biological defect in commercial wine, and explains that heat-sensitive proteins slowly precipitate and turn the wine hazy in the bottle. Bentonite removes those proteins, which is why it is the standard white wine fining. If you have a white that stays cloudy after weeks of settling, protein is one suspect, and bentonite is the answer to it. For other causes of cloudiness, see our guide to how to clear wine.

White Wine vs Red Wine

Reds are fined less often. Zoecklein notes that bentonite binds the positively charged color pigments in red wine and can remove up to 15% of the color, with more loss in younger wines. That is why bentonite is mostly a white wine tool.

When to Add Bentonite

You can add it at two points: during primary fermentation, or after fermentation once the wine has started to drop its yeast.

During Fermentation or After

Piwine gives two rates: 1 to 2 grams per gallon when used after fermentation, and up to 5 grams per gallon during fermentation. Zoecklein describes fermenting in contact with bentonite as an age-old European practice for protein stability. He lists advantages: only juice components are adsorbed, and fermentation lees are worth less than finished wine lees, so partial stabilization during fermentation is an economic gain. He gives two cautions. Add the yeast onto the surface and do not pump mix, because the clay can bind the yeast, pull it to the bottom and slow the ferment. And add yeast nutrient, because bentonite may deplete the nitrogen the yeast can use, which can cause a stuck fermentation or hydrogen sulfide; he says an added nitrogen source eliminates the problem. Our guide to wine yeast nutrient covers the doses.

What Zoecklein Says About Contact Time

Bentonite needs only minutes to react, Zoecklein says, with three quarters of the proteins reacting within the first minute of contact. He adds that it may be undesirable to leave the clay in contact with wine for a long period, because proteins can slough off the platelets. In practice that means you add it, stir, let it settle and rack it off, rather than leaving it for weeks. Piwine says settling normally takes about a week, after which you rack the wine off the sediment.

Before Other Fining

Zoecklein advises adding bentonite before any ion exchange treatment. Ben Rotter's fining article notes that Sparkolloid is sometimes used after bentonite fining, so the usual order for two agents is bentonite first.

How to Mix Bentonite Slurry

Dry bentonite thrown into wine clumps and wastes most of its surface. Zoecklein says the method of hydration and addition is of extreme importance, because fining is a surface action. Prepare the slurry first.

  1. Weigh the dose. For 5 gallons at 1 g per gallon that is 5 grams, which piwine says is about 1 teaspoon.
  2. Measure the water. Piwine says 20 ml of water per gram of bentonite, so 5 grams takes 100 ml (3 1/2 oz). Zoecklein gives the usual slurry strength as 5 to 6% weight per volume, and 1 gram in 20 ml is 5%, so the two agree.
  3. Add the powder slowly to the water in a clean container, not the other way round, and mix until every particle is wet and there are no lumps.
  4. Use hot or cold water. Piwine says either works, with hot hydrating faster. Zoecklein says most winemakers add the clay slowly to hot water and let the slurry stand for a day or two, but some suppliers suggest cool water, and he says to consult the supplier.
  5. Mix vigorously. Piwine says about 10 minutes gets it fully hydrated.
  6. Never use wine for the slurry. Piwine says so directly, and Zoecklein explains that hydrating in the wine can cut the binding ability.
  7. Stir the slurry into the wine and mix gently. Do not splash.

Use Soft or Low Mineral Water

Zoecklein warns that dissolved minerals in the water replace the sodium on the clay and hurt hydration and binding. Use water with low mineral content, such as distilled or filtered water, if your tap water is hard.

Bentonite Dose Table

The table uses the piwine rates and our arithmetic for batch size and slurry water. Piwine's figures are for its own Krystal Klear KWK bentonite. Your product may differ, so check its label and, if you can, test a small sample first. Zoecklein stresses that laboratory fining trials come before any agent goes into the cellar wine.

When you add itPer 1 gallonPer 5 gallonsSlurry water (20 ml/g)
After fermentation1 to 2 g5 to 10 g20 to 40 ml per gallon
During fermentationup to 5 gup to 25 gup to 100 ml per gallon

How This Compares With Commercial Rates

Zoecklein writes of additions of several pounds per 1000 gallons. By our arithmetic, 1 g per gallon is about 2.2 lb per 1000 gallons, so 1 to 2 g per gallon is 2.2 to 4.4 lb per 1000 gallons. The home and commercial figures are in the same range, which is reassuring. He also warns that going beyond several pounds per 1000 gallons can strip body and color and give an earthy, freshly laundered smell. Start at the low end.

The Legal Side

The federal list of wine treating materials, 27 CFR 24.246, names hydrated alumino-silicates such as bentonite as authorized to clarify and stabilize wine or juice, and sets no limit on the amount. The rule is for commercial wine, but it confirms bentonite is an ordinary wine material.

Bentonite vs Sparkolloid vs Kieselsol

These three do different jobs. Charge is the key, and it is why they are often used one after the other.

FiningType and chargeBest for
BentoniteClay, negative (Zoecklein)Protein haze, white wine, general clarity
SparkolloidPolysaccharide blend on diatomaceous earth, strong positive (Scott Laboratories)Clarifying wine and mead, without stripping color (Scott)
KieselsolSilicon dioxide (Zoecklein)Compacting lees, used with other agents

Zoecklein says bentonite can be counterfined with kieselsol to help lees compaction, and gelatin, which is positively charged, can flocculate bentonite. Our Sparkolloid guide covers the hot mix method. For the full comparison, including chitosan and gelatin, see how to clear wine. If you would rather filter than fine, see our pick of the best wine filters.

Does Bentonite Affect Taste or Color?

At the doses above, the supplier says no for flavor. Piwine describes bentonite as a general purpose fining agent that does not adversely affect wine flavor and does not remove tannins. Zoecklein agrees about restraint, and adds the warning: used in excess it can strip body and color and add an earthy smell, and in red wine it removes up to 15% of color. The pattern is simple. Small doses clear the wine and leave the flavor alone; heavy doses cost you.

Lees and Wine Loss

Zoecklein says bentonite lees volumes often range from 5 to 10%. If you fine a 5 gallon batch, expect to leave a noticeable layer behind when you rack. Use the minimum that works, and top up after racking. Our guide to degassing wine covers a step that often goes before fining.

Bentonite for winemaking

A small size for one or two batches and a pound for regular winemakers. Both are in the budget tier ($).

  1. 1Best for a first try

    North Mountain Supply Bentonite Clay for Winemaking, 4 oz

    Food grade bentonite in a small jar, about 113 g, enough for dozens of gallons at 1 to 2 g per gallon.

    Check price on Amazon

  2. 2Best for regular batches

    North Mountain Supply Bentonite Clay for Winemaking, 1 lb

    The same product in a pound size for people who fine most of their white wines.

    Check price on Amazon

The clay reacts within minutes, and Zoecklein says three quarters of the proteins react in the first minute. Settling is the slow part: piwine says about a week, after which you rack the wine off the sediment. Zoecklein advises against leaving the clay in contact with the wine for a long time.
In wine, Zoecklein gives its principal uses as clarification and protein stability. It is a clay that removes the proteins that cause haze in white wine, and it is the most commonly used fining agent in the wine industry. In home winemaking it is used the same way, in small doses mixed as a slurry.
At normal doses the supplier piwine says it does not adversely affect flavor, and it does not remove tannins. Zoecklein warns that excessive amounts can strip body and color and add an earthy smell, and that red wine loses up to 15% of its color. Use the lowest dose that clears the wine.

Wine is for adults of legal drinking age. Enjoy it responsibly.