Step-by-step guide

How to Make Rosé Wine at Home: Three Methods From Grapes or Juice

By The MyHomeWine Team · Updated

As an Amazon Associate we earn from qualifying purchases. How we choose products.

A glass of pale pink homemade rosé wine beside a jug under an airlock and red grapes, showing how to make rose wine at home
Illustration
On this page
  1. What Rosé Is
  2. Method 1: Short Maceration From Fresh Grapes
  3. Method 2: Saignée
  4. Method 3: Blending or Juice
  5. Yeast and Fermentation Temperature for Rosé
  6. Keeping Rosé Fresh

The short answer: you can make rosé at home in three ways: crush red grapes and leave the juice on the skins only briefly before pressing, bleed pink juice off a red ferment (saignée), or blend red and white. WineMaker magazine says the skin contact in the first two is generally no more than 24 hours. The easiest way to start is the third: blend 100% red and white grape juice, raise the sugar to 1.085 to 1.090 and ferment 1 gallon, as in the recipe below.

Rosé is made like a white wine from red grapes. The pink comes from the grape skins, and the whole craft is controlling how long they touch the juice. If you were looking for a wine made from flowers, see our rose petal wine recipe.

What Rosé Is

A rosé is a wine that has picked up some color from red grape skins but not enough to be red. The WineMaker article 1024 Ways to Rosé lists the three home approaches: minimal skin contact with the grapes pressed early, a short maceration of up to about 24 hours, and blending finished red and white wine. A second WineMaker piece, Rosé Techniques, collects how several home and professional winemakers do it.

MethodHow the color arrivesBest for
Short macerationCrushed grapes sit on the skins for a limited time, then are pressedAnyone with fresh wine grapes
SaignéePink juice is drawn off a red ferment earlySomeone already making a red wine
Blending or juiceRed and white wine or juice are mixed to tasteFirst batches and 1 gallon projects

Method 1: Short Maceration From Fresh Grapes

How long on the skins

WineMaker’s Rosé Techniques gives a range of answers from the winemakers it interviewed. One leaves a Pinot Noir rosé on the skins at least 36 hours, but says 12 hours is probably ample if the grapes are warm. For Syrah, another crushes the grapes for a few hours to about 12 hours. A third foot-stomps and cold-soaks for 24 to 48 hours, and a fourth presses Mourvèdre after one to three hours. The same article notes that the French appellation Tavel macerates for 10 to 36 hours. The pattern is that more color and tannin come with more time and warmth, so start short and taste.

When to press

Press once the juice has the color you want. 1024 Ways to Rosé warns that the longer the contact with the seeds, the more seed tannin is extracted, which is the harshness you are trying to avoid. For grapes that give up color slowly, it adds that enzymes can help dissolve the skin. After pressing, treat the juice as a white wine: let it settle, rack it off the solids and ferment it cool.

Grapes to choose

1024 Ways to Rosé says Syrah gives up its color without trouble, while Sangiovese is a color struggle, and that lighter varieties such as Pinot Noir give paler juice. One winemaker in Rosé Techniques picks at 19 to 22 °Brix and a pH of 3.1 to 3.4.

Method 2: Saignée

Saignée, French for bleeding, means drawing some pink juice off a red wine fermentation. Rosé Techniques describes it as juice drawn from a red ferment to raise the proportion of skin to juice left in the red. For a home winemaker making a red anyway, it gives you a bonus batch. The pink juice is then fermented like a white wine.

It is not everyone’s favorite. Two of the winemakers in Rosé Techniques say saignée rosé often needs added water or acid, and one avoids it altogether. Our guide on how to make homemade wine covers the red ferment you would bleed from.

Method 3: Blending or Juice

Blend finished red and white

Blending is the simplest way to a rosé at home. 1024 Ways to Rosé says you can blend a finished red wine into a finished white and make a rosé that way, and a big advantage is that you can try proportions in a glass before you blend in bulk. That is something you cannot do with grapes. In the European Union, the rule is stricter: Regulation (EU) 2019/934 says coupage of a non-PDO/PGI white wine with a non-PDO/PGI red wine cannot produce a rosé. That rule governs commercial EU wine, and for a home winemaker blending is simply the easiest route.

The 1 gallon juice route

For a first batch, skip the grapes and blend juice. Choose 100% grape juice with no sorbate or benzoate. Welch’s lists potassium metabisulfite as a preservative in its 100% White Grape Juice and no preservative in its 100% Red Grape Juice, as our grape juice wine guide explains in detail. A strong wine yeast handles a sulfited juice.

Recipe card

Rosé from grape juice, 1 US gallon

Makes
About 5 bottles (750 ml)
Time to drink
Several weeks to ferment and clear
Difficulty
Easy

Ingredients

  • 1 gallon (two 64 oz bottles) of 100% grape juice: mostly white juice with red juice added to taste, with no sorbate or benzoate
  • Sugar as needed, adjusted with a hydrometer to 1.085 to 1.090
  • 1 teaspoon yeast nutrient
  • 1 packet (5 g) wine yeast, such as Lalvin EC-1118
  • 1 Campden tablet for bottling day (optional)

Method

  1. Sanitize the jug, airlock, funnel, spoon and hydrometer.
  2. Pour the white juice into the jug and stir in the red juice a little at a time, tasting and looking at the color, until you have a pink you like. Keep a note of the proportions.
  3. Take a hydrometer reading. Dissolve any sugar you need in a little warm juice, add it and aim for 1.085 to 1.090.
  4. Add the nutrient and the rehydrated yeast, fit the airlock and keep the jug somewhere steady and out of direct light, on the cool side.
  5. When bubbling slows and two readings a few days apart agree, siphon the wine off the sediment into a clean jug, topped up to leave little air.
  6. Once it is clear, bottle it, adding one crushed Campden tablet per gallon first if you plan to keep it.

Method and gravity target from our grape juice wine guide. The yeast nutrient dose (1 teaspoon per gallon) and the EC-1118 sachet size follow the product listings. Sugar varies by juice, so trust the hydrometer.

Yeast and Fermentation Temperature for Rosé

Keep it cool

1024 Ways to Rosé recommends fermenting around 60°F (16°C), because cooler fermentation retains the esters that give a rosé its fruity aroma, and keeping the wine cool until bottling. Another winemaker in Rosé Techniques ferments at about 52°F (11°C), and for home use suggests a fridge at 50°F (10°C). A garage or a basement closet in winter is a practical equivalent.

Which yeast

The same article says to choose a yeast described as enhancing esters. The winemakers interviewed in Rosé Techniques name Lalvin ICV-GRE and EC-1118 for a dry rosé, and Lalvin M85 for a Zinfandel rosé. For a full comparison of strains, see our guide to the best wine yeast, including yeast for rosé.

Keeping Rosé Fresh

Sulfite

Opinions in Rosé Techniques differ. One winemaker adds sulfite early to stabilize a dry rosé but warns that too much can affect the color. Another keeps free SO2 at the low end of the recommended range, and a third keeps it at least 25 ppm free at all times once the wine is dry. Our sulfite calculator gives the dose for your batch and pH.

Oak

Most of the winemakers quoted use stainless steel, which in a home setting means a glass jug. One ages rosé three to six months in older French oak before bottling. If you want to try that, start with the guidance in our oaking guide, but a fresh rosé does not need it.

Drink it young

1024 Ways to Rosé suggests bottling within 4 to 8 months of starting the wine and drinking all of it before the next vintage. One winemaker in Rosé Techniques disagrees and says his rosés are not very good until they have a few years of age, so a bottle or two set aside is a cheap experiment. Make and drink wine responsibly, and only if you are of legal drinking age.

What you need for a 1 gallon rosé

Gear and additives for the juice recipe. You supply the juice and sugar.

  1. 1Jug and airlock

    1 Gallon Glass Jug with Airlock, Black Polyseal Cap and #6.5 Rubber Bung

    A 1 gallon glass jug for the whole ferment; the dark cap keeps light off a pale wine.

    Check price on Amazon

  2. 2Primary fermenter

    FastRack 6.5 Gallon Fermenting Bucket

    For blending and for a grape maceration; the listing describes a food grade HDPE bucket with a lid drilled for an airlock grommet.

    Check price on Amazon

  3. 3Yeast nutrient

    Fermax Yeast Nutrient, 1 lb

    Juice lacks the nutrients of whole fruit; the listing doses it at 1 teaspoon per gallon.

    Check price on Amazon

  4. 4Wine yeast

    Lalvin EC-1118 Wine Yeast, 10 Pack

    One of the strains the winemakers in WineMaker name for dry rosé; the listing gives 18% tolerance and 10 to 30 °C.

    Check price on Amazon

  5. 5Hydrometer

    Brewer’s Elite Hydrometer and Test Jar Combo

    Sets the juice to 1.085 to 1.090 and tells you when it has finished.

    Check price on Amazon

  6. 6Campden tablets

    Craft A Brew Campden Tablets, 50 Count

    Optional on bottling day for a wine you plan to keep.

    Check price on Amazon

A rosé is a pink wine that gets its color from brief contact with red grape skins, or from blending red and white wine. WineMaker magazine says winemakers make it by minimal skin contact, a short maceration generally no longer than 24 hours, or by blending. The juice is then fermented cool, like a white wine.
Mumm says it makes its rosé champagne by adding still red wine to the white base, about 15% of the blend, rather than by macerating the skins, which it says is too rich in tannins. For ordinary EU wine, regulation 2019/934 does not allow blending white and red to make rosé, and Champagne has its own rules.
It depends on batch size and ingredients. A 1 gallon juice batch uses cheap ingredients, but you also need a jug, an airlock, a hydrometer and bottles, so the saving comes over several batches. We leave out price figures because juice and equipment prices change.
Use a yeast chosen to keep fruit aromas. WineMaker advises one described as enhancing esters, and the winemakers it interviews name Lalvin ICV-GRE and EC-1118 for dry rosé and M85 for a Zinfandel rosé. Our guide to the best wine yeasts compares the options in detail.