Homemade wine guide

Wine Tannin: What It Does and How Much to Add to Homemade Wine

By The MyHomeWine Team · Updated

As an Amazon Associate we earn from qualifying purchases. How we choose products.

Wine tannin powder in a small jar beside oak chips and a glass of red wine
Illustration
On this page
  1. What Tannins Are in Wine
  2. Why Fruit Wines Need Added Tannin
  3. How Much Tannin to Add per Gallon
  4. Types of Wine Tannin
  5. When to Add Tannin
  6. Too Much Tannin? What It Tastes Like and What to Do

Wine tannin is a powder that adds astringency and body to a wine that did not get enough from its fruit. Jack Keller's fruit wine recipes use between 1/8 and 1/2 teaspoon per gallon, usually added at the start of fermentation and then adjusted by taste. Dose depends on the product, because commercial tannins are only part tannin, so the label on your jar has the last word.

If you came here to understand the tannins in a glass of wine you bought, that is a different question, and the wine schools answer it well. This page is for the person with a fermenting jug: what the powder is, why fruit wine often needs it, how much the recipes call for, which type to buy, and when it goes in. We did not run lab trials. The figures come from Jack Keller's Requested Recipes Collection, and the science comes from a Cornell AgriTech fact sheet.

What Tannins Are in Wine

A Cornell AgriTech fact sheet by Anna Katharine Mansfield defines tannins as plant polyphenolics that can precipitate proteins. When wine tannins precipitate the proteins in a drinker's saliva, the wine is perceived as astringent. That is the whole mechanism behind the dry feeling after a sip of a strong red or a cup of over-steeped tea.

Condensed and Hydrolysable Tannins

The same fact sheet sorts wine tannins into two families. Condensed tannins come from grape skins and seeds. They are the larger molecules, they taste more astringent, and when they are present at the start of fermentation they help stabilize red color. Hydrolysable tannins come from oak barrels and oak products, and commercial tannin products are made from oak galls, quebracho or other woods. They are smaller, less astringent, and have no known color stabilizing effect.

Where Wine Tannin Comes From in a Grape

Grape seeds contain more tannin than grape skins, but seed tannin extracts much more slowly, so skin tannins are the ones that dominate in wine, according to the same Cornell sheet. It also lists what pushes extraction up: warmer fermentation, punchdown, pumpover, extended maceration, and freezing and thawing grapes before fermentation. None of that exists in a jug of fruit juice, which is the starting point for the next section.

Why Fruit Wines Need Added Tannin

A grape wine fermented on its skins builds its tannin during fermentation. Most fruit wines do not have that source, and fruit varies a lot. Keller says blueberries "contain a fair amount of tannin and pectin", while in his fruit spread recipe he advises adding more tannin "for tannin-neutral jellies, like peach or apple mint". The fruit decides how much, which is why his recipes range from a pinch to half a teaspoon.

Keller Tells You to Taste for It

His pear wine instructions say that when you taste the drained juice, "you should taste both acid and tannin", and that if either appears weak you add a little more, including 1/8 teaspoon of tannin. The apple jalapeno wine goes further: after the vigorous fermentation subsides, taste the wine to judge tannin, stir in 1/8 teaspoon more if it falls short, wait 4 hours, and taste again to decide whether another 1/8 teaspoon is needed. That small stepwise method is the safest way to use the powder.

Hybrid Grapes Are the Exception

If you make wine from Concord or other hybrid grapes, the Cornell sheet has a warning: red hybrid grapes contain high concentrations of proteins that bind tannins and remove them from solution, so additions of exogenous tannin must be much higher than recommended for traditional wines. It gives no home dose, so treat that as a reason to taste and adjust rather than as a number. For a fruit wine built around dried fruit, see how our raisin wine recipe is put together, and browse the other homemade wine recipes to see which ones call for tannin.

How Much Tannin to Add per Gallon

There is no single dose, so here is what real recipes use. Every row comes from Keller's Requested Recipes Collection and is for the batch size stated.

Recipe in the collectionTanninNotes from the recipe
Niagara grape wine, 1 gallon1/4 tspAdded to the must before the yeast, to keep the wine for more than a year
Apple jalapeno wine, 1 gallon of juice1/4 to 1/2 tsp1/4 tsp at the start, then 1/8 tsp at a time after tasting
Wine from fruit spreads, 1 gallon1/2 tsp powdered grape tanninMore for tannin-neutral spreads such as peach
Pear wine, 4 to 6 lb pears1/8 tsp grape tanninAnother 1/8 tsp if the drained juice tastes weak
Raspberry chipotle wine, 2 lb raspberries1/4 to 1/2 tspAdded with the other dry ingredients

The range across these recipes is 1/8 to 1/2 teaspoon, and 1/4 teaspoon per gallon is the figure that recurs. By our arithmetic, a 5 gallon batch multiplies each figure by five: 5/8 teaspoon for 1/8, 1 1/4 teaspoons for 1/4, and 2 1/2 teaspoons for 1/2. Start at the low end, because you can add more later and you cannot take it out.

Why the Label Wins

Cornell notes that commercial tannin products contain somewhere between 20 and 50 percent tannin, with the rest made of other polyphenols, processing aids and plant material. A teaspoon from a strong product and a teaspoon from a weak one are not the same dose. Keller's recipes name "grape tannin" or "tannin" without a brand, so if your product's label gives a per gallon figure, use that and treat the table as a sanity check.

Types of Wine Tannin

Shelf products fall into a few groups. All of them are sold for the same job, and the differences are in the source.

Wine Tannin Powder (Grape and Wood Tannin)

This is the jar most home winemakers buy, usually labeled simply wine tannin or grape tannin. Cornell says commercial tannins are sourced from grapes, wood products, or a combination of the two, and that the hydrolysable ones come from oak galls, quebracho or other woods. It is sold in jars from 2 oz up to 1 lb.

Winery Grade Tannins

Wineries also buy tannin blends under brand names. We did not find a home dose chart for them in the sources we opened, so if you use one, take the dose from the maker's data sheet. The 20 to 50 percent tannin figure from Cornell applies to products in general, which is another reason not to swap one product for another at the same spoon count.

Black Tea

Before powders were easy to find, home winemakers used tea. Keller notes that "recipes that include tea (for tannin) mean black tea", and he says green tea tastes quite different. His green tea and ginger wine uses 16 teaspoons or tea bags of green tea, as the main flavor rather than as a tannin fix. Tea is a rough tool because you cannot measure its tannin, but it works for a small adjustment.

Oak

Oak is the other source of hydrolysable tannin. Cornell lists oak barrels and oak products among the sources. Chips, cubes and spirals add tannin along with flavor, so they are a different decision from a pinch of powder. Our guide to oaking wine at home covers amounts and contact time.

When to Add Tannin

There are two moments, and the recipes use both.

At the Start, Before the Yeast

Keller's Niagara grape recipe adds 1/4 teaspoon "to must prior to pitching yeast". His apple jalapeno wine mixes the first 1/4 teaspoon in with the sugar, acid blend, yeast nutrient and Campden tablet, about a day before the yeast goes in. Cornell adds a reason to do it early for red wine: condensed tannins help stabilize color when present at the beginning of fermentation.

After Fermentation, by Taste

The second moment is a correction. In the pear wine, you taste after the vigorous fermentation and add 1/8 teaspoon if the tannin seems weak. Cornell makes a point about timing here: the later a tannin addition is made, the greater the concentration that remains in the wine. Late additions go further, which is one more reason to add in small steps and keep tasting.

How to Taste for Tannin

Taste a little wine, and look for the dry, slightly grippy feeling on your gums and the sides of your tongue. A wine that tastes of fruit but feels thin is a candidate for a little tannin.Alcohol, acid and sugar all change how tannin feels, according to Cornell, and people vary a lot in how they react to it, so judge the wine at the stage it will be served at, not on its own.

Too Much Tannin? What It Tastes Like and What to Do

Too much tannin shows up as a harsh, drying feeling that sits on the gums and does not fade. Cornell separates two sensations by tannin size: tannins with a mean degree of polymerization under 5 are perceived as bitter, and those above 5 as astringent. It also notes that hard tannins tend to reflect high tannin concentration and more seed tannin than skin tannin. In practice, a bitter, rough wine usually means the dose was too high or the fruit was already rich in tannin.

What You Can Do About It

Start by checking what else is in the glass. Cornell says that alcohol, acid and sugar influence how tannin is perceived, so a rough young wine can feel better after sweetening or after the acid is adjusted. Fining is the other route that winemakers use, and our guide to how to clear wine explains what the fining agents do. We did not find a tested home dose for removing tannin, so we do not give one.

Prevention

The best fix is never needing it. Begin with the low end of the range and write down the dose so the next batch starts from a number. For more on the other additives in a fruit wine, see our guide to wine making additives.

Wine tannin and a bundle that includes it

Two tannin sizes, plus a bundle that adds pectic enzyme and acid blend. Check the label of whichever you pick for its dose.

  1. 1Best small jar

    North Mountain Supply Wine Tannin, 2 oz Jar

    A 2 ounce jar of tannin powder. At 1/4 teaspoon per gallon it covers a good number of small batches.

    Check price on Amazon

  2. 2Best bulk size

    Wine Tannin, 1 lb

    A 1 lb bag for people who make several batches a year.

    Check price on Amazon

  3. 3Tannin plus other additives

    Oxalis Supply Wine Tannin, Pectic Enzyme and Acid Blend Bundle

    Wine tannin 1 oz, pectic enzyme 1 oz and acid blend 2 oz in one bundle, the three additions most fruit wines call for.

    Check price on Amazon

There is no single figure, and the amount in the grapes does not predict the amount in the wine. Cornell AgriTech notes that total tannin in a cultivar does not correlate directly with the tannin in its wines. For homemade fruit wine, the level that matters is what you add: 1/8 to 1/2 teaspoon per gallon in Keller's recipes, adjusted by taste.
Wine has two families. Condensed tannins come from grape skins and seeds and are larger and more astringent. Hydrolysable tannins come from oak and from commercial products made from oak galls or quebracho, and they are smaller and less astringent. Cornell adds that commercial products can be sourced from grapes, wood, or a mix of both, so check the label to see which one you are buying.
Yes, as a rough substitute. Jack Keller notes that recipes that include tea for tannin mean black tea, and he says green tea tastes quite different. The weakness is that you cannot measure the tannin in a cup of tea. Use it for a small adjustment, and taste the wine before adding more.

Every other additive, from pectic enzyme to sorbate, is explained in wine making additives.

Wine is for adults of legal drinking age. Enjoy it responsibly.